Receipt Printer Manufacturers is very small. Compared with the portable office printer, the POS Thermal Receipt Printers is only 1 / 10 ~ 1 / 5 of the former, which can be held or carried around the waist;

The 80mm Thermal Printer prints all kinds of documents generated on the site, such as traffic police tickets, law enforcement documents generated on the site, vehicle loss assessment forms, cash delivery forms, meter reading notices, goods delivery forms, on-site orders, etc

Typical use of portable note KIOSK Printer China I: government law enforcement

The typical use of portable note printer II: logistics distribution

Three typical uses of portable note printer: deep distribution

Typical use of portable note printer 4: ticket replacement on train

Receipt Printer Manufacturers is very small. Compared with the portable office printer, the POS Thermal Receipt Printers is only 1 / 10 ~ 1 / 5 of the former, which can be held or carried around the waist;

The 80mm Thermal Printer prints all kinds of documents generated on the site, such as traffic police tickets, law enforcement documents generated on the site, vehicle loss assessment forms, cash delivery forms, meter reading notices, goods delivery forms, on-site orders, etc

Typical use of portable note KIOSK Printer China I: government law enforcement

The typical use of portable note printer II: logistics distribution

Three typical uses of portable note printer: deep distribution

Typical use of portable note printer 4: ticket replacement on train

Because there are a lot of label, it must be able to withstand the time test, long-term no variant, words must be long-term preservation, not fade, not by coming into contact with the solvent will wear, not because of high temperature deformation change color, and so on, so it is necessary to adopt a kind of special printing media and POS Thermal Receipt Printers materials to ensure that these features, general of ink-jet printing technology cannot achieve, laser printing, may be beyond the reach and needle dozen effect with the original design can't meet the requirements, then there is the emergence of the thermal transfer technology. Thermal transfer technology, simply put, is to use a special carbon belt, through similar to the working principle of the fax machine to print head, carried the carbon carbon powder coating after heating way, transfer to the paper or on other kinds of material, the carbon coating material of the belt can choose according to need, have strong adhesion, and print media choice, more can ensure printed handwriting is not affected by the outside world. And how the process of heating, POS Printer China, can be handed over to the computer to control, because have been developed a variety of software designed to print label, so, for the user, it is very convenient, especially in general to produce the barcode labels, bar code symbol of therefore has become an essential tool for this software.

General printer design, usually for A4 size to design, some people in order to print labels in this paper, must the other special order, is not the economy, and, for the factory, sometimes must be an hour to print perform a number of thousands of copies, these existing printer could not be completed on the market, hence, design a kind of can for POS Receipt Printer Driver, can be continuous fast printing printer arises at the historic moment. In the case of ARGOX printers, which are common in the market, they can print up to 10 meters per minute. If a label is 2 centimeters high, it can print 500 pieces per minute. Special label printer more than that, it is also in accordance with the need of the factory, to combine or keyboard scanning gun, can the independent operation, does not necessarily need to able to operate a personal computer, like photo printer, can directly read data, don't have to rely on the computer, without additional investments of the factory.

Bar code printing advantages

# can be printed in a small number of different types without waste, even if only one piece is needed

# take advantage of bar code and use with scanning gun to reduce manual processing time and cost

You can print all kinds of graphics according to your own needs, especially the company logo and the certified logo

# POS Printer UK can print sequence Numbers to track products. You can connect to the company database for quick data extraction and printing

# it can be applied to the production line to track the production of products at any time to avoid surplus materials. Can be used in warehouse management, keep abreast of the latest inventory

You can print tickets or tickets with high quality and high speed. Choose labels that are high temperature resistant, corrosion resistant, or pasted as needed

# can print very fast, the maximum speed per second can reach 15cm length With the cutter, you can cut it immediately. It is ideal for the ticket. Computer editing, printing content and printing effect are no less than printing

# using the system integration solution and the bar code label as the medium, comprehensively improve the procurement, production, storage, POS Printer Chile, etc. Sales and other management systems

1. Is serial printer(POS Thermal Receipt Printers) associated with the printing of scrambled code?

Answer: the wave holding rate set by PC host is consistent with printer.

2. Does the needle printer self-check print code or red light?

A: if the printer is equipped with ribbon, the printing exception may be too tight. Please replace the ribbon.
3. No money box for printer(POS Printer Chile)?

A: please check whether the connection of the money box of the printer's money box is standard. If the connection is correct, please send the designated maintenance point to repair.

4. Printer(Thermal Portable Label Printer) not checking paper?

Answer: the machine core sensor is too dirty, please use the soft brush to clean the sensor, if clean, still cannot check the paper; Please send the designated maintenance repair point.

5. Printer used for a period of time, online printing code?

Answer: the printer interface board is damaged, please replace the communication interface board or send the maintenance repair point.

6. The indicator light on the control panel is not bright?

Answer: check whether the power cord is inserted correctly into the printer, power adapter and power socket, check whether the printer power switch is on or not, and if these are normal, please send the designated maintenance repair point.

7. How does the needle print use the black mark position?

Answer: set the printer (bottom) DIP switch sw-1 to ON, and the printer paper black mark is ON the right side of the printed page (the black mark is ON the left side of the printed page).

8. The needle printer has a sound, but does not print?

Answer: the color belt box is not installed correctly, please correctly install the ribbon box. If the ribbon is worn out, please replace the new ribbon box.

9. Does the stylus printer print Chinese characters blur?

Answer: set the DIP switch sw-3 at the bottom of the printer to ON or adjust the machine core H.

10. Does the needle series printer support print server networking?

A: the needle series printer supports print server networking.

11. What are the GP series printer support languages?

A: GP series printers have simplified Chinese, traditional Chinese, Korean, Japanese and 21 international languages.

12. When the printer is printed for a period of time, the red light flashes (in the case of printed paper)?

A: it may be that the printing head is overheating. If it cannot print properly after a period of time, it will be too hot for the printing head, otherwise it will be sent to the designated maintenance point for maintenance.

13. How to install a network share printer driver?

A: enter your online neighbor, find a Shared printer on a computer with a Shared printer, and double-click the printer to install the driver to print locally.

14. GP - 7646 Ⅲ Ethernet interface to print more than one machine to use at the same time, sometimes can't print communication interrupt, how to troubleshoot?

A: first of all, please check the printer connection network is stable, then each printer boot self-checking, check whether there is printer EthernetID repeated conflicts, if there are any repeat conflict, please use the printer at random with CD Ethernet interface of the printer tool change EthernetID, make each printer EthernetID number only.

15. Paper or paper, but not paper?

A: feed mouth have a paper jam, can clear the following: SMP2000II movement: use the screwdriver into the paper beside the mouth two screws turn on plastic stent, carefully remove the plastic bracket, clean up the paper scraps with forceps; DP330 machine core: screw the two screws into the paper holder with a screwdriver, carefully remove the iron bracket and remove the paper with tweezers; M-u110ii machine core: the plastic holder can be taken out carefully by the direction of the arrow on the print screen, and the paper scraps are cleaned with tweezers.
16.
The printer(POS Printer USA) is not careful with water. What should I do?

Answer: should immediately shut off the power, hair dryer are available, and then blow dry the mainboard and movement and so on various parts, pay attention to the temperature is too high, the normal temperature of 50 ℃ or so.